DHF82 fast multi-element analyzer Introduction I. Overview DHF82 fast multi-element analyzer based on photometric analysis based on the principle developed by the analyzer, using a unique method of linear expansion and increase sensitivity. Spectrophotometric analysis to solve the traditional high deviation from linear component content, low component content analyzed the problem of poor sensitivity. To achieve a large-scale, rapid analysis with high accuracy. 1994 to complete the eight elements of the system analysis, 2000 to complete the eighteen elements of the system analysis, 2002 to complete the analysis of twenty elements of the system, the upgrade again after 2008 to further improve the accuracy of analysis, equipment operation more convenient. The analytical tools are the first at home and abroad, in silicate systems analysis in the field has a significant advantage in a leading position. Especially suitable for ceramics, refractories, cement, glass, geology, and other non-metallic mineral industries. The products in the universities, research institutes, industrial enterprises and more than one thousand have been applied, both received good results, and bulk access to international markets. Second, the main technical parameters 1. Measuring range 1.1 to measure oxide content range name name name content 0.1-99% silica content in the name of the content of aluminum oxide 0.1-99% ferric oxide titanium dioxide 0.1-99% 0.1-99% 0.1 to 99% sodium hydroxide, calcium oxide, 0.1-99% 0.1-99% magnesium oxide 0.1 to 99% boron trioxide 0.1 to 30% zirconium oxide, lithium oxide, 0.1-15% 0.1-99% 0.1-99% tin oxide Lead oxide 0.1 to 99% zinc oxide, manganese oxide, 0.1-99% 0.1-99% 0.1-99% chromium oxide, barium oxide, nickel oxide, 0.1-15% 0.1-10% 0.1-10% cobalt oxide of phosphorus pentoxide 0.1 30% 1.2 measurement sample types feldspar, clay, kaolin, quartz, limestone, wollastonite, talc, dolomite, ceramic powder, glazes, frit, alumina, corundum, aluminum oxide, magnesium silicate, etc. aluminate, calcium, high magnesium samples or ore. 2. Analysis accuracy: the accuracy of the analysis of the elements at or better than national standards allow error analysis method specified. 3. Analysis of Speed: start 2-3 hours to complete the amount claimed SiO2, Al2O3, Fe2O3, TiO2, K2O, Na2O, CaO, MgO full analysis. Analysis of other elements 4-6 hours to complete. 4. Injection pass to: 3 5. Number of continuous measurement sample: 10 6. With automatic nesting system. Third, the device sets of 1.DHF82 host 1 2. 3. The data processing system of a set of a set of 4 silver flame photometer crucible four sets of ultrasonic cleaning 5. 6. 1 set 1 set of four standard stock solution, instrument conditions 1. Power 220V / 50Hz 2. Total power 1kW 3. mounting area of ??3500 × 850mm 4. Total Weight 100kg 5. Ambient temperature 10-30 ℃ 6. Relative humidity ≤85%